Nasiol NL272 50mL

Apply at 5–30°C / 41–86°F and ≤50% RH. Avoid direct sunlight and work only on cool surfaces — above the suggested ranges the product may cure faster than expected. Do not work areas larger than 1 m² per session. A mid-size car takes 60–90 minutes.

1. Wash the vehicle thoroughly and clay bar if required. Polish or compound with silicone- and wax-free cutting compounds as the paint condition requires, then wash again and dry completely. Compressed air helps clear water from trims and joints.
2. Prepare the surface with Nasiol Clean to improve bonding performance. Dry with a lint-free microfiber cloth.
3. Wear the included nitrile gloves. Place a suede cloth onto the applicator block's sponge surface.
4. Shake gently before use. Open the lid and pour onto the suede cloth — 4–5 mL covers 1 m². Keep the lid closed during application.
5. Spread gently in a crisscross motion.
6. Once beading occurs (about 30 seconds in normal conditions), wipe excess off in linear motions with a Nasiol microfiber cloth. Change the suede cloth every 3–4 panels.
7. Complete the final buffing in gentle circular motions with a Nasiol microfiber cloth.
8. Keep coated surfaces away from direct sunlight, contamination, and water for 24 hours. Wait 48 hours before any detergent-based washing.

Cloth technique: fold each microfiber cloth four times before application and do not re-use a side you've already used. If the first wiping step is missed and product cures on the surface, it must be removed by polishing or sanding and then re-applied.

Coverage by vehicle class

Recommended cloth specifications

Do not apply NL272 to unlacquered plastic parts, fresh paint jobs (up to 3 months), low-quality paint jobs, glass, textile, tires, or absorbent parts.

For black trim, unpainted or raw plastic, we recommend Nasiol TrimCoat. NL272 is formulated for painted and lacquered surfaces.

Store unopened packaging in a dry, well-ventilated space away from heat and ignition sources at -3°C to 30°C / 26.6°F to 86°F. Shelf life is 24 months from production date in unopened packaging under these conditions. Once opened, use within one week and close the lid after every use to avoid loss by evaporation.