Nasiol XR03 is a professional-grade nano-ceramic coating that shields car paint from scratches and defends it against acid rain, bird droppings, road salt, and damaging UV rays. It renews the surface's original color for an attractive, refreshed look. XR03's highly hydrophobic finish lets you clean your car faster and with less effort, and delivers up to 1.5 years of durability. Recommended for professional detailers.
Nasiol XR03 50mL
50mLGet notified when this item is back in stock
Press & drag to view
| Packaging | 50 mL |
| Appearance | Colorless liquid |
| Durability | Up to 1.5+ years |
| Dry film thickness | 400–500 nm |
| Consumption per unit area | 5–8 mL/m² |
| Water contact angle | 103.05° @10 µL |
| Water contact angle after 2000 wet scrub (ISO-11998:2006) | 90.65° @10 µL |
| Water sliding angle | 13.7° @60 µL |
| Oil contact angle | 80° @10 µL |
| Gloss rate @60° (ISO-2813:2014) | 94 (acrylic) |
| Chemical resistance | 12>pH>1 |
| Salt water resistance | Yes |
| Moisture resistance | Yes |
| Density @23°C | 0.8 g/cm³ |
| pH value | 4.5–5 |
| Dry to touch time | 4 h |
| Application temperature | 5°C–30°C (≤50% RH) |
| Temperature durability | 275°C |
Technical data from the Nasiol XR03 Technical Data Sheet (Artekya Teknoloji Ltd. Şti.). Refer to the Safety Data Sheet before use.
Apply at 5–30°C / 41–86°F and ≤50% RH. Avoid direct sunlight and work only on cool surfaces — above the suggested ranges the product may cure faster than expected. Do not work areas larger than 1 m² / 10 ft² at once. XR03 protects paintwork with a single-layer application.
- Make sure the surface is dry and free of dust, wax, oil, grease, and other contamination.
- Wash the vehicle thoroughly and clay bar if required. Polish or compound with silicone- and wax-free cutting compounds as the paint condition requires, then wash again and dry completely.
- Prepare the surface with Nasiol Clean to improve bonding performance, and dry with a lint-free microfiber cloth.
- Wear the included nitrile gloves. Place a suede cloth onto the applicator block's sponge surface.
- Shake gently before use. Open the lid and pour onto the suede cloth — 5–8 mL covers 1 m². Keep the lid closed during application, and replace the suede cloth after every 3–4 panel sections.
- Spread gently in a crisscross motion. Once beading occurs (about 30 seconds in normal conditions), wipe the excess off in linear motions with a Nasiol microfiber cloth, then complete the final buffing in circular motions.
- Keep the coated surface away from direct sunlight, dust, water, and contamination for 24 hours.
Coverage by vehicle class
| Vehicle class | Typical consumption |
|---|---|
| Small vehicles (A–B class) | 30–35 mL |
| Medium vehicles (C–D class) | 35–40 mL |
| Large vehicles (E class & SUV) | 40–50 mL |
Recommended cloth specifications
| Model | Nasiol microfiber cloths |
| Blend | 70–80% polyamide / 20–30% polyester |
| Weight | 250–350 gsm |
XR03 is applicable to the paintwork of cars and transport vehicles, headlights, taillights, rims, and black plastic and trim surfaces. Do not apply to unlacquered plastic parts, fresh paint jobs (up to 3 months), low-quality paint jobs, glass, textiles, tires, or absorbent parts.
For windshields and exterior glass, we recommend Nasiol GlasShield.
For raw or unlacquered plastic, we recommend Nasiol TrimCoat.
Store unopened packaging in a dry, well-ventilated space away from heat and ignition sources at 5°C to 30°C / 41°F to 86°F. Shelf life is 24 months from production date in unopened packaging under these conditions. Once opened, use within one week and close the lid after every use to avoid loss by evaporation.