Nasiol LeatherCoat Marine is a transparent nano coating that protects the leather surfaces of your boat's interior, where salt water can wear leather out quickly. It brings water and oil repellency to genuine and artificial leather, guarding against salt, dirt, stains, and color transfer while resisting UV-related fading and deformation over time. By protecting against chemicals and UV rays, it helps rejuvenate and extend the life of the leather. LeatherCoat Marine works on natural, artificial, PU, and PVC leather seats, with up to 1 season of durability.
Nasiol LeatherCoat 150mL
150mLGet notified when this item is back in stock
Press & drag to view
| Packaging | 150 mL |
| Durability | Up to 1 season |
| Chemical resistance | 11>pH>2 |
| Salt water resistance | Yes |
| Moisture resistance | Yes |
| Dry film thickness | 700–1000 nm |
| Density @23°C | 0.86 g/cm³ |
| pH value | 5–5.5 |
| Application temperature | 5°C–30°C (≤50% RH) |
| Temperature durability | 150°C |
| Water contact angle | 135° @10 µL |
| Water contact angle after 2000 wet scrub (ISO-11998:2006) | 117° @10 µL |
| Water sliding angle | 18° @20 µL |
| Oil contact angle | 105° @10 µL |
| Dry to touch time | 2 h |
| REACH compliance | Yes |
Technical data from the Nasiol LeatherCoat Marine Technical Data Sheet (Artekya Teknoloji Ltd. Şti.). Refer to the Safety Data Sheet before use.
Apply as close as possible to 23°C and 50% relative humidity, in a shaded area, on a surface that is neither too cold nor too warm. LeatherCoat Marine is a transparent nano leather protector for the natural, artificial, PU, and PVC leather seats of marine vehicles, adding water and oil repellency, preventing paint transfer, and protecting against UV fading and wear.
- Make sure the surface is dry and free of dust, wax, oil, grease, and other contamination.
- Prepare the surface with Nasiol TEM APC Pro Marine to remove residual contamination, and dry with a clean lint-free microfiber cloth. Outline the application area with masking tape or visually.
- Shake gently before use. Pour onto the applicator cloth on the applicator block and spread homogeneously with horizontal and vertical movements — 35–45 mL/m² for genuine leather, 30–40 mL/m² for artificial. Don't use excessively, and make sure no areas are left dry.
- Allow 24 hours to dry and cure, keeping the surface away from direct sunlight, excessive dust, water, and other contaminants.
Coverage
| Natural leather | 35–45 mL/m² |
| Artificial leather | 30–40 mL/m² |
LeatherCoat Marine is for leather surfaces (natural, artificial, PU, and PVC). Do not apply to plastic parts, painted surfaces, glass, or textiles and fabrics. If accidentally applied elsewhere, wipe it off immediately with a clean lint-free microfiber cloth.
Store unopened packaging in a dry, well-ventilated space away from heat and ignition sources at -3°C to 30°C / 26.6°F to 86°F. Shelf life is 12 months from production date in unopened packaging under these conditions. After opening, use within two months and close the lid after every use to avoid loss by evaporation.