Nasiol TempoRoad forms a temporary, water-based protective film that shields your vehicle's body from bug stains and keeps sand from sticking in areas prone to sandstorms. Great for roadtrips, car cruises, track days and more. This eco-friendly formula is perfect for short-term protection, guarding against insects, dust, and sand particles while you drive. Fast and easy to apply, it can be safely removed later using only water pressure, without damaging the surface. TempoRoad works on the vehicle body, headlights, taillights, rims, license plates, and metal and alloy surfaces.
| Packaging | 500 mL |
| Appearance | Liquid gel |
| Dry film thickness | 15–20 µm |
| Consumption per unit area | 60–75 mL/m² |
| Density @23°C | 1.04 g/cm³ |
| pH value | 5.2–5.5 |
| Application temperature | 0°C–60°C (≤50% RH) |
| Temperature durability | 250°C |
| Dry to touch time | 20 mins @23°C |
Technical data from the Nasiol TempoRoad Technical Data Sheet (Artekya Teknoloji Ltd. Şti.). Refer to the Safety Data Sheet before use.
TempoRoad forms a water-based, transparent, peelable film that gives temporary protection against scratches from sand, stone chips, and tar, with UV resistance. It applies to vehicle body, headlights, taillights, rims, license plates, and metal and alloy surfaces, and removes easily by foam-lance or pressure washing, or by peeling off.
- Make sure surfaces are dry and free of dust, wax, oil, grease, and other contamination.
- Prepare the surface with Nasiol Clean and dry with a clean lint-free microfiber cloth.
- Pour onto the applicator cloth on the applicator block and spread evenly with horizontal and vertical movements — about 60–75 mL per 1 m². A homogeneous film forms in 15–20 minutes.
- During curing, keep the surface away from direct sunlight, excessive dust, water, and other contaminants. If applied to an unwanted surface, wipe with a wet cloth or remove with water.
Do not apply TempoRoad to car windshields or windows.
Store unopened packaging in a dry, well-ventilated space away from heat and ignition sources at -5°C to 40°C. Shelf life is 12 months from production date in unopened packaging under these conditions. After opening, use within two months and close the lid after every use to avoid loss by evaporation.