Nasiol LeatherBoost is a nano coating that protects both genuine and artificial leather from fading and staining while preserving its authentic color and smooth feel. Built on advanced nanotechnology, it shields the surface from water, liquid stains, and UV-related fading, and stays breathable so it won't alter the leather's texture. A small amount covers a large area, and it extends the life of leather in cars, RVs, trucks, boats, furniture, and more. LeatherBoost works on natural, synthetic, PU, and PVC leather, with up to 1 year of durability.
Nasiol LeatherBoost 150mL
150mLGet notified when this item is back in stock
Press & drag to view
| Packaging | 150 mL |
| Durability | Up to 1+ year |
| Chemical resistance | 11>pH>2 |
| Salt water resistance | Yes |
| Moisture resistance | Yes |
| Dry film thickness | 700–1000 nm |
| Density @23°C | 0.86 g/cm³ |
| pH value | 5–5.5 |
| Application temperature | 5°C–30°C (≤50% RH) |
| Temperature durability | 150°C |
| Water contact angle | 135° @10 µL |
| Water contact angle after 2000 wet scrub (ISO-11998:2006) | 117° @10 µL |
| Water sliding angle | 18° @20 µL |
| Oil contact angle | 105° @10 µL |
| Dry to touch time | 2 h |
| REACH compliance | Yes |
Technical data from the Nasiol LeatherBoost Technical Data Sheet (Artekya Teknoloji Ltd. Şti.). Refer to the Safety Data Sheet before use.
Apply as close as possible to 23°C and 50% relative humidity, in a shaded area, on a surface that is neither too cold nor too warm. LeatherBoost is a transparent nano leather protector for natural, artificial, PU, and PVC leather — car seats, furniture, laptop bags, and phone cases — adding water and oil repellency, preventing paint transfer, and protecting against UV fading and wear.
- Make sure the surface is dry and free of dust, wax, oil, grease, and other contamination.
- Prepare the surface with Nasiol TEM APC Pro to remove residual contamination, and dry with a clean lint-free microfiber cloth. Outline the application area with masking tape or visually.
- Wear gloves and shake gently before use. Pour onto the applicator cloth on the applicator block and spread homogeneously with horizontal and vertical movements — 35–45 mL/m² for genuine leather, 30–40 mL/m² for artificial. Don't use excessively, and make sure no areas are left dry.
- Allow 24 hours to dry and cure, keeping the surface away from direct sunlight, excessive dust, water, and other contaminants.
Coverage
| Natural leather | 35–45 mL/m² |
| Artificial leather | 30–40 mL/m² |
LeatherBoost is for leather surfaces (natural, artificial, PU, and PVC). Do not apply to plastic parts, painted surfaces, glass, or textiles and fabrics. If accidentally applied elsewhere, wipe it off immediately with a clean lint-free microfiber cloth.
Store unopened packaging in a dry, well-ventilated space away from heat and ignition sources at -3°C to 30°C / 26.6°F to 86°F. Shelf life is 12 months from production date in unopened packaging under these conditions. After opening, use within two months and close the lid after every use to avoid loss by evaporation.