Nasiol ZR53 is a 10H nano-ceramic coating that delivers ultimate, long-lasting protection for your car's paintwork. It forms a hard, hydrophobic layer that guards against scratches, acid rain, bird droppings, road salt, and damaging UV rays, while giving the surface a deep, glossy finish that stays easy to clean. With up to 3 years of durability, ZR53 is a professional-grade favorite among detailers seeking lasting shine and protection.
Nasiol ZR53 50mL
50mLGet notified when this item is back in stock
Press & drag to view
| Packaging | 50 mL |
| Appearance | Colorless liquid |
| Durability | Up to 3+ years |
| Pencil hardness (ISO-15184:2012) | 10H |
| Dry film thickness | 700–800 nm |
| Consumption per unit area | 4–5 mL/m² |
| Water contact angle | 105° @10 µL |
| Water contact angle after 3000 wet scrub (ISO-11998:2006) | 100° @10 µL |
| Water sliding angle | 11° @20 µL |
| Oil contact angle | 84° @10 µL |
| Gloss rate @60° (ISO-2813:2014) | 95 (acrylic) |
| Chemical resistance | 12>pH>1 |
| Salt water resistance | Yes |
| Moisture resistance | Yes |
| Density @23°C | 0.86 g/cm³ |
| pH value | 5–5.5 |
| Dry to touch time | 4 h |
| Application temperature | 5°C–30°C (≤50% RH) |
| Temperature durability | 150°C |
| REACH compliance | Yes |
Technical data from the Nasiol ZR53 Technical Data Sheet (Artekya Teknoloji Ltd. Şti.). Refer to the Safety Data Sheet before use.
Apply at 5–30°C / 41–86°F and ≤50% RH. Avoid direct sunlight and work only on cool surfaces — above the suggested ranges the product may cure faster than expected. Do not work areas larger than 1 m² per session. A mid-size car takes 60–90 minutes.
- Wash the vehicle thoroughly and clay bar if required. Polish or compound with silicone- and wax-free cutting compounds as the paint condition requires, then wash again and dry completely. Compressed air helps clear water from trims and joints.
- Prepare the surface with Nasiol Clean to improve bonding performance. Ensure no residual contamination remains and dry with a lint-free microfiber cloth.
- Wear the included nitrile gloves. Place a suede cloth onto the applicator block's sponge surface.
- Shake gently before use. Open the lid and pour onto the suede cloth — 4–5 mL covers 1 m². Keep the lid closed during application.
- Spread gently in a crisscross motion.
- Once beading occurs (about 30 seconds in normal conditions), wipe excess off in linear motions with a Nasiol microfiber cloth. Change the suede cloth every 3–4 panels.
- Complete the final buffing in gentle circular motions with a Nasiol microfiber cloth.
- Keep coated surfaces away from direct sunlight, contamination, and water for 24 hours. Wait 48 hours before any detergent-based washing.
Cloth technique: fold each microfiber cloth four times before application and do not re-use a side you've already used. If the first wiping step is missed and product cures on the surface, it must be removed by polishing or sanding and then re-applied.
Coverage by vehicle class
| Vehicle class | Typical consumption |
|---|---|
| Small vehicles (A–B class) | 30–35 mL |
| Medium vehicles (C–D class) | 35–40 mL |
| Large vehicles (E class & SUV) | 40–50 mL |
Recommended cloth specifications
| Model | Nasiol microfiber cloths |
| Blend | 70–80% polyamide / 20–30% polyester |
| Weight | 250–350 gsm |
ZR53 is formulated for car body paint, lights, and lacquered trim surfaces. Do not use on chromated or unlacquered painted plastic parts.
For black trim, unpainted or raw plastic, we recommend Nasiol TrimCoat.
For windshields and exterior glass, we recommend Nasiol GlasShield.
Store unopened packaging in a dry, well-ventilated space away from heat and ignition sources at -3°C to 30°C / 26.6°F to 86°F. Shelf life is 24 months from production date in unopened packaging under these conditions. Once opened, use within one week and close the lid after every use to avoid loss by evaporation.