Nasiol TrimCoat is a nano-ceramic coating that instantly restores and protects your car's plastic and rubber trim. It keeps trim color-saturated with high scratch resistance and strong water repellency, while preventing the color fading caused by UV radiation, harsh chemicals, and road grime. It also permanently renews dull, discolored parts, returning them to their original satin look. TrimCoat works on any color exterior and interior plastic, vinyl, and rubber trim, including bumpers, lights, moldings, door handles, grilles, fenders, mirror housings, and windshield cowlings, with up to 2 years of durability.
Nasiol TrimCoat 30mL
30mLGet notified when this item is back in stock
Press & drag to view
| Packaging | 30 mL |
| Appearance | Colorless to brownish liquid |
| Durability | Up to 2+ years |
| Dry film thickness | 700–1000 nm |
| Consumption per unit area | 5–8 mL/m² |
| Water contact angle | 115° @10 µL |
| Water sliding angle | 20° @20 µL |
| Oil contact angle | 34° @10 µL |
| Gloss rate @60° (ISO-2813:2014) | 80 |
| Chemical resistance | 12>pH>1 |
| Salt water resistance | Yes |
| Moisture resistance | Yes |
| Density @23°C | 0.86 g/cm³ |
| pH value | 7 |
| Dry to touch time | 2 h |
| Application temperature | 5°C–30°C (≤50% RH) |
| REACH compliance | Yes |
Technical data from the Nasiol TrimCoat Technical Data Sheet (Artekya Teknoloji Ltd. Şti.). Refer to the Safety Data Sheet before use.
TrimCoat is developed for both end users and professionals. Applying to a mid-size car takes 15–20 minutes. Apply at 5–30°C / 41–86°F and ≤50% RH. Avoid direct sunlight and work only on cool surfaces — above the suggested ranges the product may cure faster than expected.
- Make sure the surface is dry and free of dust, wax, oil, grease, and other contamination.
- Prepare the surface with Nasiol Clean to improve bonding performance. Ensure no residual contamination remains and dry with a lint-free microfiber cloth. Do not work areas larger than 1 m² per session.
- Wear the included nitrile gloves.
- Shake gently before use. Open the lid and pour the needed amount onto the applicator pad — 5–8 mL covers 1 m². Keep the lid closed during application.
- Spread gently in a crisscross motion.
- Keep the coated surface away from direct sunlight, contamination, and water for 48 hours. Wait 48 hours for the coating to cure and become resistant to abrasion and chemicals before any detergent-based washing.
Store unopened packaging tightly closed in a dry, well-ventilated space away from heat and ignition sources at -3°C to 30°C / 26.6°F to 86°F. Shelf life is 12 months from production date in unopened packaging under these conditions. Once opened, use within one week.