Nasiol MetalCoat F2 is the fastest way to apply a ceramic coating: a simple spray-on, buff-off application. Its unique nano-coating formula safely treats automobiles, bicycles, motorcycles, and trucks, forming a single protective layer that delivers scratch resistance, high hydrophobicity, and an instant gloss that stays easy to keep clean. With 7H hardness and up to 1 year of durability, MetalCoat F2 is a budget-friendly favorite for detailing enthusiasts, and it also works well as a refresher over longer-lasting coatings like ZR53 and NL272
Nasiol MetalCoat F2 50mL
50mLGet notified when this item is back in stock
Press & drag to view
| Packaging | 50 mL |
| Appearance | Colorless liquid |
| Durability | Up to 1+ year |
| Pencil hardness (ISO-15184:2012) | 7H |
| Dry film thickness | 200–300 nm |
| Consumption per unit area | 5–8 mL/m² |
| Water contact angle | 102.95° @10 µL |
| Water contact angle after 2000 wet scrub (ISO-11998:2006) | 99.57° @10 µL |
| Water sliding angle | 14.1° @60 µL |
| Oil contact angle | 76° @10 µL |
| Gloss rate @60° (ISO-2813:2014) | 93 (acrylic) |
| Chemical resistance | 12>pH>1 |
| Salt water resistance | Yes |
| Moisture resistance | Yes |
| Density @23°C | 0.8 g/cm³ |
| pH value | 4.8–5 |
| Dry to touch time | 4 h |
| Application temperature | 5°C–30°C (≤50% RH) |
| Temperature durability | 275°C |
| REACH compliance | Yes |
Technical data from the Nasiol MetalCoat F2 Technical Data Sheet (Artekya Teknoloji Ltd. Şti.). Refer to the Safety Data Sheet before use.
Apply at 5–30°C / 41–86°F and ≤50% RH. Avoid direct sunlight and work only on cool surfaces — above the suggested ranges the product may cure faster than expected. Do not work areas larger than 1 m² / 10 ft² at once.
- Make sure the surface is dry and free of dust, wax, oil, grease, and other contamination.
- Wash the vehicle thoroughly and clay bar if required. Polish or compound with silicone- and wax-free cutting compounds as the paint condition requires, then wash again and dry completely.
- Prepare the surface with Nasiol Clean to improve bonding performance, and dry with a lint-free microfiber cloth.
- Wear the included nitrile gloves.
- Spray 20–30 times per square meter with the MetalCoat F2 bottle and buff immediately with a Nasiol microfiber cloth. Consumption is 5–8 mL/m².
- Keep the coated surface away from direct sunlight, dust, water, and contamination for 24 hours.
Note: the trigger sprayer is single-use — the product's chemistry causes it to dry or clog after first use.
Coverage by vehicle class
| Vehicle class | Typical consumption |
|---|---|
| Small vehicles (A–B class) | 30–35 mL |
| Medium vehicles (C–D class) | 35–40 mL |
| Large vehicles (E class & SUV) | 40–50 mL |
Recommended cloth specifications
| Model | Nasiol microfiber cloths |
| Blend | 70–80% polyamide / 20–30% polyester |
| Weight | 250–350 gsm |
MetalCoat F2 is formulated for car body, engine plastic and metal parts, headlights, taillights, and rims. Do not apply to unlacquered plastic parts, fresh paint jobs (up to 3 months), low-quality paint jobs, glass, textiles, or tires.
For black trim, unpainted or raw plastic, we recommend Nasiol TrimCoat.
For windshields and exterior glass, we recommend Nasiol GlasShield.
Store unopened packaging in a dry, well-ventilated space away from heat and ignition sources at -3°C to 30°C / 26.6°F to 86°F. Shelf life is 18 months from production date in unopened packaging under these conditions. Once opened, use within one week and close the lid after every use to avoid loss by evaporation.