Nasiol MarineCoat Fast delivers superior, long-lasting nano protection for the above-water plastic and metal parts of your boat or yacht. It shields these surfaces from UV rays and stains while adding a deep shine and an easy-to-clean effect, so exhaust smoke and grime wipe away without harsh chemicals. With strong UV filtering, salt-water resistance, and long-lasting antifouling properties, it repels dirt and water for up to one season. Featuring 7H hardness, MarineCoat Fast applies easily to stainless steel, nickel-plated metal, and other metal and plastic parts of boats, ships, yachts, and vessels.
Nasiol MarineCoat Fast 150mL
150mLGet notified when this item is back in stock
Press & drag to view
| Packaging | 150 mL |
| Appearance | Colorless liquid |
| Durability | Up to 1 season |
| Dry film thickness | 200–300 nm |
| Consumption per unit area | 5–8 mL/m² |
| Water contact angle | 97° @10 µL |
| Water contact angle after 3000 wet scrub (ISO-11998:2006) | 93° @10 µL |
| Water sliding angle | 23° @20 µL |
| Oil contact angle | 76° @10 µL |
| Gloss rate @60° (ISO-2813:2014) | 98 (acrylic) |
| Chemical resistance | 12>pH>1 |
| Salt water resistance | Yes |
| Moisture resistance | Yes |
| Density @23°C | 0.8 g/cm³ |
| pH value | 4.8–5 |
| Dry to touch time | 4 h |
| Application temperature | 5°C–30°C (≤50% RH) |
| Temperature durability | 275°C |
| REACH compliance | Yes |
Technical data from the Nasiol MarineCoat Fast Technical Data Sheet (Artekya Teknoloji Ltd. Şti.). Refer to the Safety Data Sheet before use.
Apply at 5–30°C / 41–86°F and ≤50% RH, out of direct sunlight and on cool surfaces. MarineCoat Fast gives long-lasting nano protection to the above-water parts of boats and yachts — hulls above the waterline, plus inox, nickel-plate, and other metal and plastic parts — with UV and stain protection and a deep-shine, easy-clean finish.
- Make sure surfaces are dry and free of dust, wax, oil, grease, and other contamination. Wash thoroughly, clay bar if required, then polish or compound with silicone- and wax-free cutting compounds as needed and dry completely.
- Prepare the surface with Nasiol Clean Marine to improve bonding, and dry with a lint-free microfiber cloth.
- Wear the included nitrile gloves.
- Spray 20–30 times per square meter with the MarineCoat Fast bottle (5–8 mL/m²) and buff immediately with a Nasiol microfiber cloth. Do not work areas larger than 1 m² / 10 ft² at once.
- Keep the coated surface away from direct sunlight, dust, water, and contamination for 24 hours.
Recommended cloth specifications
| Model | Nasiol microfiber cloths |
| Blend | 70–80% polyamide / 20–30% polyester |
| Weight | 250–350 gsm |
MarineCoat Fast is not applied on antifouling paint. Use only on the specified surfaces — inox and nickel-plate metal and the other metal and plastic parts of water vehicles. If accidentally applied elsewhere, wipe the surface down completely with a dry microfiber cloth.
Store unopened packaging in a dry, well-ventilated space away from heat and ignition sources at -3°C to 30°C / 26.6°F to 86°F. Shelf life is 12 months from production date in unopened packaging under these conditions. After opening, use within one week and close the lid after every use to avoid loss by evaporation.