Nasiol DeckCoat Marine protects the natural wooden parts of yachts and boats from fouling, salt water, and harmful UV rays. The combination of sun and sea is tough on wood, and this high-tech formula gives wooden surfaces hydrophobic and oleophobic properties that repel common liquids and stains while making them easy to clean. It prolongs the lifetime of boat decks and other wooden furnishings and helps preserve their freshly buffed, 'new' look. DeckCoat is breathable and applies to absorbent, porous, natural marine wood, with up to 1 season of durability.
Nasiol DeckCoat Marine 500mL
500mLGet notified when this item is back in stock
Press & drag to view
| Packaging | 500 mL |
| Appearance | Colorless liquid |
| Durability | Up to 1 season |
| Chemical resistance | 11>pH>1 |
| Dry film thickness | 60–70 nm |
| Consumption per unit area | 40–60 mL/m² |
| Density @23°C | 0.809 g/cm³ |
| pH value | 2.0 |
| Breathability | Yes |
| Water contact angle | 144° @10 µL |
| Water sliding angle | 16° @20 µL |
| Oil contact angle | 90° @10 µL |
| Application temperature | 5°C–30°C (≤50% RH) |
| Temperature durability | 110°C |
| REACH compliance | Yes |
Technical data from the Nasiol DeckCoat Marine Technical Data Sheet (Artekya Teknoloji Ltd. Şti.). Refer to the Safety Data Sheet before use.
DeckCoat Marine gives natural wooden marine surfaces hydrophobic and oleophobic properties against common liquids and stains, with an easy-to-clean effect. It is for absorbent, porous, and natural marine wooden surfaces. Apply in a shaded, well-ventilated area on cool surfaces; above the suggested temperature or humidity the product may cure faster than expected.
- Make sure surfaces are dry and free of dust, wax, oil, grease, and other contamination.
- Shake gently before use. Always test a small, out-of-sight area first to check the result and material compatibility.
- Spray the essential amount onto the surface with the trigger bottle, until it looks homogeneous.
- Keep the coated surface away from water and contamination for 24 hours and don't perform harsh tests on it. Ventilate the area well in the hours after application.
If the product contacts an incompatible material, wipe it off immediately with a dry, clean microfiber cloth.
Apply only to absorbent, porous, and natural marine wooden surfaces. Do not apply to any other surface. If accidentally applied elsewhere, wipe the surface down completely with a dry microfiber cloth.
Store containers tightly closed in a dry, well-ventilated space away from heat and ignition sources at -3°C to 30°C. Shelf life is 24 months from production date in unopened packaging under these conditions. After opening, use within one month.